•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Parameter
Option
Default
Usage
Parameter 1-70 PM Start Mode
.
Parameter 1-72 Start Function
.
Parameter 1-73 Flying Start
.
Parameter 1-80 Function at Stop
.
Parameter 1-82 Min Speed for Function at Stop [Hz]
.
Parameter 1-90 Motor Thermal Protection
.
Parameter 2-00 DC Hold/Motor Preheat Current
.
Parameter 2-01 DC Brake Current
.
Parameter 2-02 DC Braking Time
.
Parameter 2-04 DC Brake Cut In Speed
.
Parameter 2-10 Brake Function
.
Parameter 4-14 Motor Speed High Limit [Hz]
.
Parameter 4-19 Max Output Frequency
.
Parameter 4-58 Missing Motor Phase Function
.
Parameter 14-65 Speed Derate Dead Time Compensation
.
Parameter 1-20
Motor Power
0.18–110 kW/0.25–150 hp
Size related
Enter the motor power from the nameplate data.
Parameter 1-22
Motor Voltage
50–1000 V
Size related
Enter the motor voltage from the nameplate data.
Parameter 1-23
Motor Frequen-
cy
20–400 Hz
Size related
Enter the motor frequency from the nameplate data.
Parameter 1-24
Motor Current
0.01–1000.00 A
Size related
Enter the motor current from the nameplate data.
Parameter 1-25
Motor Nominal
Speed
50–9999 RPM
Size related
Enter the motor nominal speed from the nameplate data.
Parameter 1-26
Motor Cont.
Rated Torque
0.1–1000.0 Nm
Size related
This parameter is available when
parameter 1-10 Motor Con-
struction
is set to options that enable permanent motor
mode.
N O T I C E
Changing this parameter affects the settings of other pa-
rameters.
Parameter 1-29
Automatic Mo-
tor Adaption
(AMA)
See
parameter 1-29 Automatic
Motor Adaption (AMA)
.
Off
Performing an AMA optimizes motor performance.
Parameter 1-30
Stator Resist-
ance (Rs)
0.000–99.990 Ω
Size related
Set the stator resistance value.
Parameter 1-37
d-axis Induc-
tance (Ld)
0.000–1000.000 mH
Size related
Enter the value of the d-axis inductance. Obtain the value
from the permanent magnet motor datasheet.
AJ363928382091en-000101 / 130R0983
86 | Danfoss A/S © 2021.04
Programming
VLT® Flow Drive FC 111
Design Guide