Danfoss VLT AutomationDrive FC 302, Programming Manual, Page: 294 / 346

5.2.30 43-** Unit Readouts
Par.
No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
43-0* Component Status
43-00 Component Temp. 0 °C All set-ups x TRUE 100 Int8
43-01 Auxiliary Temp. 0 °C All set-ups x TRUE 100 Int8
43-02 Component SW ID 0 N/A All set-ups x TRUE 0
VisStr[
18]
43-1* Power Card Status
43-10 HS Temp. ph.U 0 °C All set-ups x TRUE 100 Int8
43-11 HS Temp. ph.V 0 °C All set-ups x TRUE 100 Int8
43-12 HS Temp. ph.W 0 °C All set-ups x TRUE 100 Int8
43-13 PC Fan A Speed 0 RPM All set-ups x TRUE 67 Uint16
43-14 PC Fan B Speed 0 RPM All set-ups x TRUE 67 Uint16
43-15 PC Fan C Speed 0 RPM All set-ups x TRUE 67 Uint16
43-2* Fan Pow.Card Status
43-20 FPC Fan A Speed 0 RPM All set-ups x TRUE 67 Uint16
43-21 FPC Fan B Speed 0 RPM All set-ups x TRUE 67 Uint16
43-22 FPC Fan C Speed 0 RPM All set-ups x TRUE 67 Uint16
43-23 FPC Fan D Speed 0 RPM All set-ups x TRUE 67 Uint16
43-24 FPC Fan E Speed 0 RPM All set-ups x TRUE 67 Uint16
43-25 FPC Fan F Speed 0 RPM All set-ups x TRUE 67 Uint16
5.2.31 600-** PROFIsafe
5.2.32 601-** PROFIdrive 2
Par.
No. #
Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
601-2
2 PROFIdrive Safety Channel Tel. No. 108 N/A All set-ups TRUE 0 Uint16
Table 5.7
5.3 Parameter Lists and Options, Software Version 48.20 (IMC)
5.3.1 0-** Operation / Display
Par.
No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
0-0* Basic Settings
0-01 Language [0] English 1 set-up TRUE - Uint8
0-02 Motor Speed Unit ExpressionLimit 2 set-ups FALSE - Uint8
0-03 Regional Settings ExpressionLimit 2 set-ups FALSE - Uint8
0-04 Operating State at Power-up (Hand) [1] Forced stop, ref=old All set-ups TRUE - Uint8
0-09 Performance Monitor 0 % All set-ups TRUE -1 Uint16
0-1* Set-up Operations
0-10 Active Set-up [1] Set-up 1 1 set-up TRUE - Uint8
0-11 Edit Set-up [1] Set-up 1 All set-ups TRUE - Uint8
0-12 This Set-up Linked to [0] Not linked All set-ups FALSE - Uint8
0-13 Readout: Linked Set-ups 0 N/A All set-ups FALSE 0 Uint16
0-14 Readout: Edit Set-ups / Channel 0 N/A All set-ups TRUE 0 Int32
0-15 Readout: actual setup 0 N/A All set-ups FALSE 0 Uint8
Parameter Lists
VLT
®
AutomationDrive FC 301/302
292 Danfoss A/S © 10/2018 All rights reserved. MG33MP02
5 5