5-12 Terminal 27 Digital Input
Option:
Function:
[96]
Mains Loss
[97]
Mains Loss Inverse
[98]
Start edge triggered
[100] Safe Option Reset
[107] Target Inverse
[108] Enable Master Offset
[109] Start Virtual Master
[110] Start Homing
[111] Activate Touch
[112] Relative Position
[113] Enable Reference
[114] Sync. to Pos. Mode
[115] Home Sensor
[116] Home Sensor Inv.
[117] Touch Sensor
[118] Touch Sensor Inv.
[119] Speed Mode
[231] Power Limit Mot.
[232] Power Limit Gen.
[233] Power Limit Both
5-13 Terminal 29 Digital Input
Option:
Function:
NOTICE
This parameter is available
for FC 302 only.
[0]
No operation
[1]
Reset
[2]
Coast inverse
[3]
Coast and reset inv
[4]
Quick stop inverse
[5]
DC-brake inverse
[6]
Stop inverse
[8]
Start
[9]
Latched start
[10]
Reversing
[11]
Start reversing
[12]
Enable start forward
[13]
Enable start reverse
[14]
Jog
Functions are described in
parameter group 5-1* Digital
Inputs
.
[15]
Preset reference on
[16]
Preset ref bit 0
[17]
Preset ref bit 1
[18]
Preset ref bit 2
[19]
Freeze reference
[20]
Freeze output
[21]
Speed up
[22]
Speed down
[23]
Set-up select bit 0
5-13 Terminal 29 Digital Input
Option:
Function:
[24]
Set-up select bit 1
[28]
Catch up
[29]
Slow down
[30]
Counter input
[31]
Pulse edge triggered
[32]
Pulse time based
[34]
Ramp bit 0
[35]
Ramp bit 1
[44]
Restart Drive
[51]
External Interlock
[55]
DigiPot increase
[56]
DigiPot decrease
[57]
DigiPot clear
[58]
DigiPot Hoist
[60]
Counter A (up)
[61]
Counter A (down)
[62]
Reset Counter A
[63]
Counter B (up)
[64]
Counter B (down)
[65]
Reset Counter B
[70]
Mech. Brake Feedb.
[71]
Mech. Brake Feedb. Inv.
[72]
PID error inverse
[73]
PID reset I part
[74]
PID enable
[75]
MCO Specific
[78]
Reset Maint. Word
[80]
PTC Card 1
[91]
Profidrive OFF2
[92]
Profidrive OFF3
[94]
Light Load Detection
[96]
Mains Loss
[97]
Mains Loss Inverse
[98]
Start edge triggered
[100] Safe Option Reset
[107] Target Inverse
[108] Enable Master Offset
[109] Start Virtual Master
[110] Start Homing
[111] Activate Touch
[112] Relative Position
[113] Enable Reference
[114] Sync. to Pos. Mode
[115] Home Sensor
[116] Home Sensor Inv.
[117] Touch Sensor
[118] Touch Sensor Inv.
[119] Speed Mode
[231] Power Limit Mot.
[232] Power Limit Gen.
[233] Power Limit Both
Parameter Descriptions
VLT
®
AutomationDrive FC 301/302
106
Danfoss A/S © 10/2018 All rights reserved.
MG33MP02
3
3
Summary of Contents for VLT AutomationDrive FC 302
Page 2: ......