Danfoss VLT AAF00x, Operating Instructions Manual

Page: 55 / 103

6.2 Description of Parameters
6.2.1 Main Menu
The Main Menu includes all available parameters in the
VLT® Active Filter. All parameters are grouped in a logic
way with a group name indicating the function of the
parameter group. All parameters are listed by name and
number in the following section. A quicker overview can
be found in the Parameter Lists later in this manual.
6.3 0-** Operation/Display
Parameters related to the fundamental functions of the
Active Filter, function of the LCP buttons and configuration
of the LCP display.
6.3.1 0-0* Basic Settings
0-01 Language
Option: Function:
Defines the language to be used in the
display. The filter can be delivered with 4
different language packages. English and
German are included in all packages.
English cannot be erased or
manipulated.
[0]
*
English Part of Language packages 1 - 4
[1] Deutsch Part of Language packages 1 - 4
[2] Francais Part of Language package 1
[3] Dansk Part of Language package 1
[4] Spanish Part of Language package 1
[5] Italiano Part of Language package 1
Svenska Part of Language package 1
[7] Nederlands Part of Language package 1
[10] Chinese Part of Language package 2
Suomi Part of Language package 1
[22] English US Part of Language package 4
Greek Part of Language package 4
Bras.port Part of Language package 4
Slovenian Part of Language package 3
Korean Part of Language package 2
Japanese Part of Language package 2
Turkish Part of Language package 4
Trad.Chinese Part of Language package 2
Bulgarian Part of Language package 3
0-01 Language
Option: Function:
Srpski Part of Language package 3
Romanian Part of Language package 3
Magyar Part of Language package 3
Czech Part of Language package 3
Polski Part of Language package 4
Russian Part of Language package 3
Thai Part of Language package 2
Bahasa Indonesia Part of Language package 2
[52] Hrvatski
6.3.2 0-04 Operating State at Power-up
(Hand)
0-04 Operating State at Power-up (Hand)
Option: Function:
Selects the operating mode upon
reconnection of the filter to mains voltage
after power down in Hand (local) operation
mode.
[0] Resume Restarts the filter maintaining the same start/
stop settings (applied by [HAND ON/OFF]) as
before the filter was powered down.
[1]
*
Forced stop Restarts the filter with a saved local reference,
after mains voltage reappears and after
pressing [HAND ON].
6.3.3 0-1* Set-up Operations
Define and control the individual parameter setups.
The filter has four parameter setups that can be
programmed independently of each other. This makes the
filter very flexible.
The active setup (i.e. the setup in which the filter is
currently operating) can be selected in
0-10 Active Set-up
and is displayed in the LCP. Using Multi set-up it is
possible to switch between setups with the filter running
or stopped, via digital input or serial communication
commands. If it is necessary to change setups whilst
running, ensure
0-12 This Set-up Linked to is programmed
as required. Using 0-11 Edit Set-up it is possible to edit
parameters within any of the setups whilst continuing the
filter operation in its Active Setup which can be a different
setup to that being edited. Using
0-51 Set-up Copy it is
possible to copy parameter settings between the setups to
enable quicker commissioning if similar parameter settings
are required in different setups.
How to Programme VLT Active Filter AAF 00x
54 MG.90.V2.02 - VLT® is a registered Danfoss trademark
6 6