15-30 Fault Log: Error Code
Array [10]
Range:
Function:
0
*
[0 - 255 ] View the error code and look up its meaning in
the
Troubleshooting
chapter of the VLT
AutomationDrive Design Guide.
15-31 Alarm Log: Value
Array [10]
Range:
Function:
0
*
[-32767 - 32767 ] View an extra description of the error.
This parameter is mostly used in
combination with alarm 38 ‘internal fault’.
15-32 Alarm Log: Time
Array [10]
Range:
Function:
0 s
*
[0 - 2147483647 s] View the time when the logged event
occurred. Time is measured in seconds
from unit start-up.
6.7.5 15-4* Unit Identification
Parameters containing read-only information about the
hardware and software configuration of the active filter.
15-40 FC Type
Range:
Function:
0
*
[0 - 0 ] View the FC type. The readout is identical to the FC
300 Series power field of the type code definition,
characters 1-6.
15-41 Power Section
Range:
Function:
0
*
[0 - 0 ] View the FC type. The readout is identical to the FC
300 Series power field of the type code definition,
characters 7-10.
15-42 Voltage
Range:
Function:
0
*
[0 - 0 ] View the FC type. The readout is identical to the
power field of the type code definition, characters
11-12.
15-43 Software Version
Range:
Function:
0
*
[0 - 0 ] View the combined SW version (or ‘package
version’) consisting of power SW and control SW.
15-44 Ordered Typecode String
Range:
Function:
0
*
[0 - 0 ] View the type code string used for re-ordering the
active filter in its original configuration.
15-45 Actual Typecode String
Range:
Function:
0
*
[0 - 0 ]
View the actual type code string.
15-46 Unit Ordering No
Range:
Function:
0 N/A
*
[0–0 N/A] View the 8-digit ordering number used for
re-ordering the active filter in its original
configuration.
15-47 Power Card Ordering No.
Range:
Function:
0
*
[0 - 0 ]
View the power card ordering number.
15-48 LCP ID Num.
Range:
Function:
0
*
[0 - 0 ]
View the LCP ID number.
15-49 SW ID Control Card
Range:
Function:
0
*
[0 - 0 ] View the control card software version number.
15-50 SW ID Power Card
Range:
Function:
0
*
[0 - 0 ] View the power card software version number.
15-51 Unit Serial Number
Range:
Function:
0 N/A
*
[0–0 N/A]
View the active filter serial number.
15-53 Power Card Serial Number
Range:
Function:
0
*
[0 - 0 ]
View the power card serial number.
6.7.6 15-6* Option Ident.
This read-only parameter group contains information about
the hardware and software configuration of the options
installed in slots A, B, C0 and C1.
15-60 Option Mounted
Range:
Function:
0
*
[0 - 0 ]
View the installed option type.
How to Program
VLT Active Filter AAF 00x
MG.90.V2.22 - VLT
®
is a registered Danfoss trademark
6-21
6
6
