5 How to Operate the Active Filter
5.1 Ways of Operation
The active filter can be operated in 2 ways:
1.
Graphical Local Control Panel (GLCP)
2.
RS-485 serial communication or USB, both for PC
connection
5.1.1 How to Operate Graphical LCP (GLCP)
The GLCP is divided into four functional groups:
1.
Graphical display with Status lines.
2.
Menu keys and LEDs - selecting mode, changing
parameters and switching between display
functions.
3.
Navigation keys and LEDs (LEDs).
4.
Operation keys and LEDs.
Graphical display:
The LCD display is back lit with a total of 6 alpha-numeric
lines. All data is displayed on the LCP which can show up
to five operating variables while in [Status] mode.
Display lines:
a.
Status line: Status messages displaying icons and
graphics.
b.
Line 1-2: Operator data lines displaying data and
variables defined or chosen by the user. By
pressing the [Status] key, up to one extra line can
be added.
c.
Status line: Status messages displaying text.
The display is divided into 3 sections:
Top section (a)
shows the status when in status mode, or up to two
variables when not in status mode and in the event of an
alarm/warning.
On
Warm
Alarm
OK
Status
Quick
Menus
Main
Menu
Alarm
Log
Status
1(1)
0.0%
0.0%
0˚C
111A
0A
Auro Running
a
b
c
130BB468.10
Auto
on
Hand
on
Off
Reset
The number of the Active Set-up (selected as the Active
Set-up in
) is shown. When programming
in another set-up than the Active Set-up, the number of
the set-up being programmed appears to the right in
brackets.
Middle section (b)
shows up to 5 variables with related unit, regardless of
status. In the event of an alarm/warning, the warning is
shown instead of the variables.
It is possible to toggle between three status read-out
displays by pressing the [Status] key.
Operating variables with different formatting are shown in
each status screen - see below.
Several values or measurements can be linked to each of
the displayed operating variables. The values/
measurements to be displayed can be defined via
parameters
0-20 Display Line 1.1 Small
to
0-24 Display Line 3
Large
, which can be accessed via [QUICK MENU], "Q3
How to Operate the Active F...
VLT Active Filter AAF 00x
MG.90.V2.22 - VLT
®
is a registered Danfoss trademark
5-1
5
5
