VLT
®
8000 AQUA
Programming
509 - 532 Data read-out
Value:
Parame-
ter no.
Description
Display text
Unit
Updating
interval
509
Resulting reference
(REFERENCE %)
%
80 msec.
510
Resulting reference [unit]
(REFERENCE [UNIT])
Hz, rpm
80 msec.
511
Feedback [unit]
(FEEDBACK)
Par. 415
80 msec.
512
Frequency [Hz]
(FREQUENCY)
Hz
80 msec.
513
User-defined read-out
(CUSTOM READOUT)
Hz x scaling
80 msec.
514
Motor current [A]
(CURRENT)
Amp
80 msec.
515
Power [kW]
(POWER KW)
kW
80 msec.
516
Motor voltage [V]
(POWER HK)
HP
80 msec.
517
Motor voltage [V]
(MOTOR VOLT)
V
AC
80 msec.
518
DC link voltage [V]
(DC LINK VOLTAGE)
V
DC
80 msec.
519
Thermal load, motor [%]
(MOTOR TEMPERATURE)
%
80 msec.
520
Thermal load, VLT [%]
(VLT TEMPERATURE)
%
80 msec.
521
Digital input
(DIGITAL INPUT)
Binary
80 msec.
522
Terminal 53, analog input [V]
(TERMINAL 53, ANALOG
INPUT)
Volt
20 msec.
523
Terminal 54, analog input [V]
(TERMINAL 54, ANALOG
INPUT)
Volt
20 msec.
524
Terminal 60, analog input [mA]
(TERMINAL 60, ANALOG
INPUT)
mA
20 msec.
525
Pulse reference [Hz]
(PULSE REFERENCE)
Hz
20 msec.
526
External reference [%]
(EXTERNAL REFERENCE)
%
20 msec.
527
Status word
(STATUS WORD HEX)
Hex
20 msec.
528
Heat sink temperature [°C]
(HEAT SINK TEMP.)
°C
1.2 sec.
529
Alarm word
(ALARM WORD, HEX)
Hex
20 msec.
530
Control word
(VLT CONTROL WORD, HEX)
Hex
2 msec.
531
Warning word
(WARN. WORD)
Hex
20 msec.
532
Extended status word
(STATUS WORD)
Hex
20 msec.
537
Relay status
(RELAY STATUS)
Binary
80 msec.
Function:
These parameters can be read out via the serial
communication port and via the display. See also
parameters 007-010
Display read-out
.
Description of choice:
Resulting reference, parameter 509
:
gives a percentage for the resulting reference in the
range from
Minimum reference, Ref
MIN
to
Maximum
reference, Ref
MAX
. See also
Reference handling
.
Resulting reference [unit], parameter 510:
gives the resulting reference by means of the
unit Hz in
Open loop
(parameter 100). In
Closed
loop
, the reference unit is selected in parameter
415
Units with closed loop
.
Feedback [unit], parameter 511:
gives the resulting feedback value by means of the
unit/scaling selected in parameters 413, 414 and
415. See also
Feedback handling
.
Frequency [Hz], parameter 512:
gives the output frequency from the frequency converter.
User-defined read-out, parameter 513:
gives a user-defined value calculated on the basis
of the present output frequency and unit, as well as
the scaling in selected in parameter 005
Max. value
of user-defined read-out
. The unit is selected in
parameter 006
Unit for user-defined read-out.
Motor current [A], parameter 514:
Gives the motor phase current measured
as an effective value.
Power [kW], parameter 515:
Gives the present power absorption of the motor in kW.
Power [HP], parameter 516:
Gives the present power absorption of the motor in HP.
✭
= factory setting. () = display text [] = value for use in communication via serial communication port
MG.83.A2.02 - VLT is a registered Danfoss trademark
163