1.
2.
3.
4.
8.3 Using the Parameter Menu (M2)
8.3.1 Finding the Parameter
Use these instructions to find the parameter to edit.
Procedure
To find the Parameter menu, scroll down in the main menu until the location indication
M2
shows on the first line of the
display.
READY
G1
Keypad
G8
e
3
0
b
g
0
2
3
.1
0
Parameters
Push the Menu button Right to move into the Parameter Group Menu (G#).
READY
Keypad
G1
G8
e
3
0
b
g
0
2
4
.1
0
Input signals
To find the parameter group, use the Browser buttons Up and Down.
READY
Keypad
P1 P18
e
3
0
b
g
0
2
5
.1
0
Input signals
Use the Browser buttons Up and Down to find the parameter (P#) to edit. To move directly from the last parameter of a
parameter group to the first parameter of that group, push the Browser button Up.
READY
Keypad
e
3
0
b
g
0
2
6
.1
0
Min Frequency
13.95 Hz
AQ275638903263en-000601 / DPD00910 | 97
Danfoss A/S © 2022.12
Using the Control Panel
VACON® NXS/NXP Air-cooled
Operating Guide
