•
•
•
•
•
•
•
1 Introduction
1.1 Purpose of this Design Guide
This design guide is intended for qualified personnel, such as:
Project and systems engineers.
Design consultants.
Application and product specialists.
The design guide provides technical information for the DC filters used in VACON® NXP DC/DC Converter applications. Its purpose
is to provide design considerations and planning data for integration of the device into a system. It caters for the selection of the
filters for the application in a diversity of installations. Reviewing the detailed product information in the design stage enables de-
veloping a well-conceived system with optimal functionality and efficiency.
The filter range is designed for typical Energy Storage systems which is the main application area for DC/DC converters.
1.2 Additional Resources
Other resources are available to understand installation, programming, operation, and options.
The VACON® NXP DC/DC Converter operating guide provides information about the installation and operation of the VACON®
NXP DC/DC Converter application.
The VACON® NXP DC/DC Converter application guide provides greater detail on how to work with the application software and
how to set the parameters of the AC drive modules.
VACON® NXP Common DC Bus and VACON® NXP Liquid-cooled Common DC Bus user manuals provide detailed information for
the installation, commissioning, and operation of the AC drive modules.
The operating and installation guides for VACON
®
options give detailed information about specific drive options.
Supplementary publications and manuals are available from Danfoss. See
1.3 Version History
This design guide is regularly reviewed and updated. All suggestions for improvement are welcome.
The original language of this design guide is English.
Table 1: VACON® NXP DC/DC Converter DC Filters Design Guide Version History
Version
Remarks
A
First release
AJ377845348678en-000101 / 172F4785
4 | Danfoss A/S © 2023.01
Introduction
DC Filters
Design Guide
