I The [select] button. Use it to move between 2 last displays, for
example, to see how new value changes some other value.
K The [reset] button. Use it to reset a fault.
J The Menu button Left. Use it to move back in the menu, move
the cursor left (in the Parameter menu).
L The Browser button Up. Use it to scroll the main menu and
the pages of different submenus and to increase a value.
Illustration 3: Keypad Buttons for VACON
®
NXP
3.8.2 Display
A
K
L
M
B
C
D
E
H
I
J
F
G
e
3
0
b
f9
7
9
.1
0
READY
FAULT
STOP
RUN
Bus/Comm
Keypad
I/O term
ALARM
A The motor is in RUN state. The indication starts to blink when
a stop command is given and blinks while the speed
continues to decrease.
C The motor rotation direction is reverse.
E The AC power is on.
G A fault is given and the AC drive is stopped.
I The control panel is the active control mode.
K The location indication. The line shows the symbol and
number of the menu, parameter and so on. For example,
M2
= Menu 2 (Parameters) or
P2.1.3
= Acceleration time.
M The value line. The line shows the numerical and text values
of references, parameters and so on. It also shows the
number of submenus that are available in each menu.
B The motor rotation direction is forward.
D The drive does not operate.
F An alarm is given.
H The I/O terminals is the active control mode.
J The fieldbus is the active control mode.
L The description line. The line shows the description of the
menu, value, or fault.
Illustration 4: Display Indications
The drive status indicators (A-G) give information about the status of the motor and the AC drive.
The control mode indications (H, I, J) show the selection of the control mode. The control mode tells from where the START/STOP
commands are given and reference values are changed. To make this selection, go to the Keypad control menu (M3) (see
).
The three text lines (K, L, M) give information about the current location in the menu structure and the operation of the drive.
Product Overview
Operating Guide | VACON® NXI Inverters FI9-FI14
AQ304441431479en-000101 / DPD00909| 23
Danfoss A/S © 2019.11
Summary of Contents for VACON NXP FI10
Page 1: ...Operating Guide VACON NXI Inverters FI9 FI14...
Page 2: ......
