Danfoss VACON NX, Application Manual

Page: 63 / 360

6.4 Parameter Lists for PID Control Application
6.4.1 Monitoring Values (Control Panel: Menu M1)
The monitoring values are the actual values of parameters and signals as well as statuses and measurements. Monitoring values
cannot be edited.
The monitoring values V1.19 to V1.22 are available with the PID control application only.
Table 35: Monitoring Values
Index Monitoring value Unit Form ID Description
V1.1 Output frequency Hz #.## 1 -
V1.2 Frequency reference Hz #.## 25 -
V1.3 Motor speed RPM # 2 -
V1.4 Motor current A Varies 3 -
V1.5 Motor torque % #.# 4 -
V1.6 Motor shaft power % #.# 5 -
V1.7 Motor voltage V #.# 6 -
V1.8 DC-link voltage V # 7 -
V1.9 Unit temperature °C # 8 -
V1.10 Motor temperature % #.# 9 -
V1.11 Analog input 1 V/mA #.## 13 -
V1.12 Analog input 2 V/mA #.## 14 -
V1.13 Analog input 3 - - 27 -
V1.14 Analog input 4 - - 28 -
V1.15 DIN 1, 2,3 - - 15 -
V1.16 DIN 4, 5, 6 - - 16 -
V1.17 DO1, RO1, RO2 - - 17 -
V1.18 Analog I
out
mA #.## 26 -
V1.19 PID Reference % - 20 -
V1.20 PID Actual value % - 21 -
V1.21 PID Error value % - 22 -
V1.22 PID Output % - 23 -
V1.23 Special display for actual value - - 29 -
V1.24 PT-100 Temperature ºC #.# 42 -
G1.25 Monitoring items - - - -
V1.26.1 Current A Varies 1113 -
AB296635287482en-000301 / DPD00903 | 63 Danfoss A/S © 2023.02
PID Control Application
VACON® NX All-in-One
Application Guide