The PVG 32 PVSI end plates close off the valve stack section placed between them by placing them at the
end. Furthermore, the end plate is ensuring Load Sense (LS) is relieved to tank pressure when the valve is
not operated.
The PVSI end plate variants are based on a generic platform with a wide selection of additional features,
enabling you to tailor the PVSI to suit the demands of any hydraulic system.
The generic PVSI end plate platform includes the following main variants.
•
PVSI - Cast iron
•
PVSI with LX-connection - Cast iron
PVSI
The PVSI Start Plates features:
•
Integrated LS pressure relief valve to tank
•
Optional integrated thermal orifice
•
Optional version without seals
PVSI module
PVSI dimensions
109.4 [4.31]
111 [4.37]
95 [3.74]
23 [0.91]
Weight: 0.47 kg [1.05 lb]
PVSI schematic
See part number table for details on maximum pressure capacity
Technical data
Max. rated pressure
P-port continuous
300 / 350 bar
[4351/5075 psi]
P-port intermittent
400 bar
[5800 psi]
T-port static/dynamic
25/40 bar
[365/580 psi]
Oil temperature
Recommended
30 60°C
[86 140°F]
Minimum
-30°C
[-22°F]
Maximum
90°
[194°F]
Ambient temperature
Recommended
-30 60°C
[-22 140°F]
Technical Information
PVG-EX 32 Proportional Valve Group
PVSI End Plates
©
Danfoss | June 2019
BC290860493426en-000103 | 123
