Danfoss PVED-CLS, User Manual, Page: 181 / 182

© Danfoss | August 2018 AQ00000211 |
181
ENGINEERING TOMORROW
17.6.5.3 Post conditions
After a successful manual spool calibration, the calibration counter and bit inverted copy for spool calibration should be
updated as described below:
•
Populate a temporary data sector for “Production/Calibration Flag”. Update the Spool dead-band calibration
counters. Increment P3771 from 0 to 1 and increment bit-wise inverted P3772 from 255 to 254 for the displayed
below,
Production/Calibration Flag
Name
A
ddr
es
s
D
at
a t
yp
e
U
ni
t
Description of parameter
U
se
r
Range
D
a
nf
o
ss
de
fa
ul
t
val
u
e
S
a
fet
y
cri
ti
ca
l
p
a
ra
m
et
ers
‘
S
’
Mi
n
.
M
ax.
Calibration counter - Spool calibration
P3771 U8 - Calibration counter - Spool calibration OEM 0 255 0
Bit inverted value for "Calibration counter -
Spool calibration"
P3772 U8 - Bit inverted value for "Calibration counter - Spool calibration" OEM 0 255 255
Calibration counter - Analogue WAS
calibration
P3773 U8 - Calibration counter - Analogue WAS OEM 0 255 0
Bit inverted value for "Calibration counter -
Analogue WAS calibration"
P3774 U8 - Bit inverted value for "Calibration counter - Analogue WAS" OEM 0 255 255
Calibration counter - CAN WAS calibration
P3775 U8 - Calibration counter - CAN WAS OEM 0 255 0
Bit inverted value for "Calibration counter -
CAN WAS calibration"
P3776 U8 - Bit inverted value for "Calibration counter - CAN WAS" OEM 0 255 255
Calibration counter - Analogue joystick P3777 U8 - Analogue sensor based Joystick calibration counter OEM 0 255 0
Bit inverted value for "Calibration counter -
Analogue joystick"
P3778 U8 -
Bit inverted value for Analogue sensor based Joystick
calibration counter
OEM 0 255 255
Table 91
•
Calculate the sector CRC as CRC-16-CCITT (P3771…P3778) and store (word) at the CRC/Checksum address
(P3789). For example of how to calculate sector CRC, please see paragraph 17.5.2
•
Write data sector “Production/Calibration Flag” to the MAIN-controller