
For more information see these technical informations:
•
PVG 32 Proportional Valve Groups 520L0344,
•
PVG 100 Proportional Valve Groups 520L0720 and
•
PVG 120 Proportional Valve Groups 520L0356.
Mechanical subsystem
The mechanical subsystem gives interface to valve and control system and provides protection to
hydraulic and electrical/electronic subsystem. The LVDT, not used on all variants, gives feed back to
electronics on spool position. The LVDT is calibrated in production and recalibration should only be done
in special cases. The standard PVE has an aluminum block for distributing pilot oil. PVE with anodized
block are available.
The connector gives the electrical interface to power and control system. Danfoss have a variety of
connectors. We know that tradition and the aspects of serviceability are important when our customers
choose. We have chosen the Deutsch connector as our main solution. The quality of wiring has direct
influence on water integrity and signal quality therefore disturbance or changes in cabling can influence
safety and performance.
PVE connectors: Hirschmann/DIN, AMP and Deutsch
Electronic subsystem
The PVE (A/ H/ M/ S/ U) control signal is a low current voltage, a PWM can also be used. The PVEP has
build-in a PWM evaluation and cannot be controlled by proportional voltage. The control signal is
referred to as U
S
.
Function blocks for electronics
Technical Information
PVE, Series 4 for PVG 32/100/120 and PVHC
Functionality
520L0553 • Rev GD • Jan 2014
13
Summary of Contents for PVE 4 Series
Page 53: ...Technical Information PVE Series 4 for PVG 32 100 120 and PVHC 520L0553 Rev GD Jan 2014 53...
Page 54: ...Technical Information PVE Series 4 for PVG 32 100 120 and PVHC 54 520L0553 Rev GD Jan 2014...
Page 55: ...Technical Information PVE Series 4 for PVG 32 100 120 and PVHC 520L0553 Rev GD Jan 2014 55...