6.7 Mains Connection
Step 1: First mount earth cable.
Step 2: Mount wires in terminals L1/L, L2 and L3/N and
tighten.
Illustration 6.4 Mounting of earth cable and mains wires
For 3-phase connection, connect wires to all three
terminals.
For single-phase connection, connect wires to terminals
L1/L and L3/N.
Illustration 6.5 Three-phase and single-phase wire connections
How to Install
VLT Micro Drive Design Guide
48
MG02K102 - VLT
®
is a registered Danfoss trademark
6
6