1.0 Introduction
MMIMYK is the advanced “all in one” device that performs up to three different functions: -
Programming module - Gateway - Data logger. It has a bright graphic display and a keyboard that
enable to configure the module to run several functions. It has also a slot for MMC card (Multi Media
Card) to extend the memory capacity
This guide will help you to install the MMIMYK correctly when it is used as a gateway or datalogger.
1.1
Purpose of the
document
MMIMYK has among others the functionalities of CAN/RS485 <- -> USB gateway and Datalogger. For
some application this means that MMIMYK will have a fixed installation. In order to make the correct
setup and avoid problems this document provides the installation guidelines.
1.2 References
Please see guidelines for CAN and RS485 fieldbus installation
"AC-E-IT_HwNetworkSpecification_DKRCC.PS.RI0.F1.02_520H5537" on
www.danfoss.com/mcx
.
1.3
Definitions and
abbreviations
EMC
Electromagnetic Compatibility
EMI
Electromagnetic Interference
User manual
|
MMIMYK installation guide
© Danfoss | DCS (ZA) | 2016.04
DKRCC.PS.RJ0.A2.02 | 520H10916 | 3