Danfoss iC7-Marine PROFINET, Operating Manual, Page: 37 / 42

Operating Guide | iC7-Marine PROFINET
e30bk437.10
Figure 12: Example of a PROFINET Report
6.3
Configuring Port Mirroring Settings
Enable or disable the port mirroring function for network troubleshooting with a network analyzer tool.
1.
In MyDrive® Insight, go to
Setup and Service
>
Interface Configuration
>
Port Mirroring Settings
.
Table 22: Port Mirroring Settings
Function Selections Description
Source port • X1
• X2 Frames are mirrored from this port.
Destination port • X1
• X2 Frames are mirrored to this port.
Block RX from desti-
nation port Enable/Disable Device does not receive any frames from Destination Port when en-
abled.
Enable port mirror-
ing Enable/Disable Enables the Port Mirroring feature.
6.4
Identifying a Unit
The winking function makes the fieldbus indicator LEDs ST, X1, and X2 flash yellow to make it easy to identify a unit. The function is
enabled in MyDrive® Insight.
1.
In MyDrive® Insight, click the device name in live mode.
2.
Select
Device Status
.
Danfoss Drives Oy © 2024.04 AQ481922043454en-000101 / 172K4282A |
37