FC 300 Instruction Manual
How to Install
NOTE
To remove the cable from the terminal:
1.
Insert a screwdriver in the square hole.
2.
Pull out the cable.
"
Control Terminals
Control Terminals (FC 301)
Drawing reference numbers:
1.
8 pole plug digital I/O.
2.
3 pole plug RS485 Bus.
3.
6 pole analog I/O.
4.
USB Connection.
Control Terminals (FC 302)
Drawing reference numbers:
1.
10 pole plug digital I/O.
2.
3 pole plug RS485 Bus.
3.
6 pole analog I/O.
4.
USB Connection.
Control terminals
21
MG.33.A4.22 - VLT is a registered Danfoss trademark
