7
Troubleshooting
Error
Cause
Remedy
Machine does not skive
Power switch is OFF
Activate the power switch
Voltage incorrect
Check voltage supply
Power plug defective
Check power plug and replace,
if required
Incorrect rotation direction of
electric motor
Check rotation direction, cor-
rect electrical connection
Foot pedal not connected to
socket
Check cable connection
between foot pedal and ma-
chine.
Foot pedal is defective
Check the foot pedal and re-
place it, if required
Machine operates sluggishly
Skiving knives are worn
Check skiving knives for wear
and replace them, if required
Skiving result is inadequate
Skiving knives are worn
Check skiving knives for wear
and replace them, if required
Summary of Contents for ET6100
