5.8 Stop
1.
Complete the forming process.
2.
Deposit the work piece outside the machine.
3.
Deactivate the main switch (1).
4.
Check the machine for contamination, leaks and external da-
mage.
5.
Check the crimping tool and retaining bolts for contamination,
damage and secure fitting.
6.
Check the oil level.
7.
Remove contamination, dust and chips using a vacuum.
Inform the fitter in case of damage or other irregularities.
5.9 Emergency stop
In case of an emergency
Immediately deactivate the emergency-stop switch in cases of
emergency. The crimping tool movement will be stopped. The drive
unit is shut down.
Summary of Contents for ET4400
