Danfoss ET4100, Operator'S Manual

Page: 14 / 60

2.4 Safety
2.4.1 Working area
The working area is defined as the area 1 metre all around the ma-
chine (shaded).
•
Keep the working area free from trip hazards
•
Use ducts for lines and cables
•
Provide good illumination
2.4.2 Protection equipment
Due to the variety of customer-specific workpieces, no additional
standard protection equipment can be supplied with the machine that
can prevent potential residual risks imposed by the machine.
The necessity of additional, workpiece-specific protection equipment
may for instance arise for angled workpiece geometries needing a