manualshive.com logo in svg

Danfoss EKC 223, User Manual, Page: 37 / 38

Share
Download
Danfoss EKC 223 User Manual Download Page 37

Certificates, declarations, and approvals

The list contains all certificates, declarations, and approvals for this product type. Individual code number may have

some or all of these approvals, and certain local approvals may not appear on the list.

Some approvals may change over time. You can check the most current status at danfoss.com or contact your local

Danfoss representative if you have any questions.

Certificates, declarations, and approvals

Table 32: Certificates, declarations, and approvals

Controller

Certification

Mark

Country

EKC 223/224

EMC/LVD/RoHS

CE

EU

EKC 223/224

UL recognized

cURus

NAM (US and Canada)

EKC 223/224

LVE/EMC/RoHS

EAC

Russia, Kazakhstan, Belarus

EKC 223/224

EMC/LVD/RoHS

UKCA

UK

EKC 223/224

LVD/EMC/RoHS

UA

Ukraine

EKC 223/224

EMC/LVD/RoHS

CMIM

Morocco

R290/R600a end-use applications employing in accordance with the IEC60079-15 requirements.

© Danfoss | Climate Solutions | 2023.05

BC432222569027en-000201 | 37

Case controller, type EKC 223 and EKC 224

Summary of Contents for EKC 223







































Reviews:

No comments