Bluetooth Adapter (EKA 202 & EKA 203) is a plug in type device for ERC and EETa range of controllers to
provide bluetooth connectivity with companion mobile application 'KoolConnect'.
• Bluetooth Low Energy 5.2
• Simple Plug anvd Play module
• Powered from controller
• Data logging for 15 days
• Real time clock with power back up option
Technical specifications:
Specifications
EKA 202
EKA 203
Input voltage
5 V DC / 12 V DC
5 V DC / 12 V DC
Max Current
70 mA
76 mA
Bluetooth version
5.2
5.2
Bluetooth range (without any obstruction around)
10 m
10 m
Data storage duration
15 days
15 days
RTC power back up
No power backup
36 hours (approx.)
Communication interface with controller
UART, One wire
UART, One wire
Operating temperature
-25 – +55 °C
-25 – +55 °C
Maximum humidity
<90% RH (Non-condensing)
<90% RH (Non-condensing)
Storage temperature
-40 – +70 °C
-40 – +70 °C
Ordering code
Bluetooth adapter
080N0022 (Single Pack)
080N0026 (I Pack)
080N0023 (Single Pack)
080N0027 (I Pack)
Interface cable
080N0329 (ERC 11x) | 080N0327 (ERC21x) | 080N0325 (EETa)
Supported Controllers
ERC11x, ERC21x (080G34xx series only) and EETa
Approvals
1)
CE, UL, FCC, ISED
1)
For latest approval status and other local approvals, please check at danfoss.com or contact your local Danfoss representative.
Dimensions
(units are in mm)
Procedure for adapter installation
Fig. 2: Top view
Fig. 3: Rear view
Danf
os
s
80G8311
59.6
Sc
an
to
co
nn
ec
t
Danf
os
s
80G8340
35
17.7
A.
Bluetooth Adapter
B.
QR code chip
C.
TTL port for connection
with controller
Danf
os
s
80G8345
Scan
to
co
nne
ct
1. Detach the QR code chip from the Bluetooth Adapter by
breaking. The QR code chip is used for pairing with mobile
application.
2. Attach the QR code chip to the door or any clean part of the
cabinet that can be easily accessed for the pairing procedure.
Danf
os
s
80G831
5
Scan to connect
Danf
os
s
80G8346
Scan
to co
nnec
t
A
C
B
Danf
os
s
80G831
5
Fig. 1: EKA 202/203
Bluetooth Adapter
Type
EKA 202
&
EKA 203
Installation guide
ENGLISH
© Danfoss | Climate Solutions | 2023.01
© Danfoss | Climate Solutions | 2023.01
AN40413688421601-000202 | 1
AN40413688421601-000202 | 2
Function
Description
Illustration
LED info
Power-up
Power up the controller connected with
Bluetooth Adapter.
Bluetooth Adapter starts power up
initialization (it gets power from connected
controller).
Danf
os
s
80G8341
Green
Blue
Red
Danf
os
s
80G8342
Green
• White – Blue – Red – Green
LED blinking in sequence
indicates power up
initialization.
• After few seconds, Green
LED rapid flashes indicating
controller detection is in
progress.
Established
communication
with controller and
broadcasting.
After power up initialization, the adapter
establishes communication with connected
controller and start broadcasting.
Danf
os
s
80G8347
Green
• Green LED slow flashes
(1s/1s)
Unsuccessful identification/communication
with controller.
Danf
os
s
80G8343
Red
• Red LED rapid flashes.
Connection with
mobile app and Real
time clock (RTC)
update
Search and connect broadcasting adapter
using KoolConnect companion app. Click
on "Set time" when mobile app shows alert
message to synchronize the adapter time
with mobile time.
1)
Danf
os
s
80G8344
Blue
• LED turns to constant Blue
indicating Bluetooth is
connected.
Power up sequence and connection with mobile application:
EU CONFORMITY NOTICE
Hereby, Danfoss A/S declares that the radio equipment type (CRO) Bluetooth adapter is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
1)
Note:
1. Ensure that the module is connected to the mobile app after final power up and installation to finalize the setup properly. If the
module is not connected after final power up at customer's site, the module will log the data without the correct time stamp.
2. If the Bluetooth Adapter is changed from one controller model to another (ex: ERC112C to ERC112D or EETa 3W), all the logged
data from previous controller are erased and start logging afresh from new controller. The data from previous controller is
retained if one code no. is changed to another code no. within the same controller model.
Scan QR Code below for KoolConnect mobile app download, regulatory and other informations:
Android version 8.0 or later
iOS 11 or later (Iphone 8 & above)
KoolConnect
Danf
os
s
80G8313
Danf
os
s
80G8314
Danf
os
s
80G8317
Warnings/note:
• The installation of Bluetooth Adapter should be performed while
the Cooler is switched off.
• Ensure the Bluetooth Adapter is installed away from heating
source, direct sunlight, dripping water, dusty environment.
• Do not mount the adapter directly in food compartment in case
of cold space installation.
5. Connect the Bluetooth Adapter to communication port of
controller using interface cable (
Fig. 7
)
– TTL port in ERC21x and EETa
– DI port in ERC11x
3. Secure the Bluetooth Adapter in a convenient location using
double sided tape (
Fig. 4-5
) or by screw mounting (
Fig. 6
)
4. Power off the controller by switching off the main supply to
the controller.
Fig. 4
Fig. 6
Fig. 5
Danf
os
s
80G831
6
Fig. 7
Interface
cable
Bluetooth Adapter
Controller
• Avoid any obstruction around the adapter that impacts
Bluetooth communication.
• Interface cable ordered separately for the respective controller
to be used for connecting Bluetooth Adapter to Controller.
• Ensure that cables are always strain relieved and tied up by
other means to cabinet.
080R4219
AN40413688421601-000202
