background image

Even the programming of economy temperatures (i.e. low-

ering of temperature at night and when you are at work) is

very simple. A calculation of the heating start is not needed

to reach a specific temperature at a specific time. Just tell

the ECtemp 550 when you want the comfort temperature,

and the rest will happen automatically; by identifying the

rate of heat loss from the room, ECtemp 550 knows when

to start heating in order to achieve the selected tempera-

ture at the right time.

1.1

Safety Instructions

Please observe the following guidelines:

Do not cover the thermostat, e.g. by hanging towels or

similar items in front of it! This will impair the ability of

the thermostat to sense and adjust the room tempera-

ture correctly.

Do not spill liquids of any kind into the thermostat.

Do not open, disassemble, or tamper with the thermo-

stat in any way.

If the thermostat is installed in a place frequented by

small children, use the safety lock.

Do not interrupt the power supply to the thermostat.

The installation of the thermostat must be done by an

authorized and qualified installer according to local

regulations.

ECtemp 550

User Guide 

5

Summary of Contents for ECtemp 550





















Reviews: