Danfoss DSH Series Application Manuallines Download

Page: 30 / 66

GENER

AL INFORMA

TION

ODUC

T INFORMA

TION

INTEGR

ATION INT

O SY

STEM

ORDERING INFORMA

TION

STEM DESIGN

Design compressor mounting

DSH360X-424X-456X-

479X-565X mounting

DSH482 to DSH1455

mounting

The large compressor, DSH240, 295 or 381, is
mounted with hexagonal rigid spacers on the
rails. The DSH120, 161 or 184 compressor is fixed
on beams by rigid spacer, and the beams are

mounted with rigid spacers on the rails. Rubber
grommets and spacers must be installed below
the rails.

DSH240-295-381

DSH120-161-184

Included in tandem kit
Not supplied

Supplied with the compressor

Tightening

torque

16Nm

Not supplied

Φ10mm

Tightening

torque

39Nm

5mm

(0.2inch)

thickness

Tightening

torque

55Nm

For parallel mounting, the compressors must be
mounted with hexagonal rigid spacers on the
rails. Rubber grommets and spacers must be

installed below the rails. These parts are included
in accessories.

Tightening torque 39Nm

HM10 x100

5mm

(0.2inch)

Thickness

Tightening torque

55Nm

Tightening torque

16Nm

Supplied in accessory kit 7777045
Included in tandem or trio accessory kit
Not supplied

For 60Hz applications, it is recommended to
replace hexagonal rigid spacers by triangular
rigid spacers available in kit 120Z0495 (see

also section “Mechanical vibrations”) instead of
hexagonal ones from kit 7777045.

* except DSH565

5mm

(0.2inch)

thickness

4mm

(0.16inch)

thickness

Tightening

torque 15Nm

FRCC.PC.045.A7.02

Summary of Contents for DSH Series



































































Search results

Summary of Contents for DSH Series

Reviews:

Related manuals for DSH Series

Brands by name

Popular brands

Danfoss DSH Series, Application Manuallines

Search results

Summary of Contents for DSH Series

Reviews:

Related manuals for DSH Series

Brands by name

Popular brands