Danfoss D1 130, Service Manual, Page: 57 / 61

D1P 260 TPE2 control plug fittings
G235
G250
G253
F140
F150
G255
G254
G130
G140
G225
F160
Plug fitting reference
Item Description Wrench size Torque
G130 Bias orifice 3 mm hex 3.6-4.4 Nm
G140 Servo orifice 4 mm 3.6-4.4 Nm
G225 Outlet pressure test port MB (M12 x 1.5) 6 mm hex 22.5-27.5 Nm
G235 Servo pressure test port M4 (M12 x 1.5) 6 mm hex 22.5-27.5 Nm
G250 Servo orifice plug (M12 x 1.5) 6 mm hex 22.5-27.5 Nm
G253 Bias orifice plug (5/16 - 24 UNF-2A) 1/8 in 9.9-12.1 Nm
G254 Edge filter 6 mm hex 9.9-12.1 Nm
G255 Edge filter plug (M14 x 1.5) 6 mm hex 30.6-37.4 Nm
F140 Drain port L3 (M33 x 2) 17 mm hex 68.4-83.6 Nm
F150 Drain port L2 (M33 x 2) 17 mm hex 68.4-83.6 Nm
F160 Drain port L1 (M33 x 2) 17 mm hex 68.4-83.6 Nm
Service Manual
D1 High Power Open Circuit Pumps Size 65/130/145/193/260
Minor repairs
© Danfoss | July 2019 L1527453 | AX00000292en-CN0201 | 57