Pump instruction APP S 674 (180R9276)
ro-solutions.com
Instruction
APP S 674 pumps
APP S 674 3.0-3.5 / APP S 674 5.1-9.0
APP S 674 21-38
MAKING MODERN LIVING POSSIBLE
Data sheet
APP S 674 pumps
18
521B1187 / DKCFN.PD.014.H2.02 / 03.2013
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice.
This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss A/S
High Pressure Pumps
DK-6430 Nordborg
Denmark
10.1 Warranty
Danfoss APP S 674 pumps are designed for long
operation, low maintenance and reduced
lifecycle costs.
Provided that the pump has been running
according to the Danfoss specifications, Danfoss
guarantees 8,000 hours service-free operation,
however, max. 18 months from date of produc-
tion.
If Danfoss recommendations concerning
system-design are not followed,
it will strongly
influence the life of the APP S 674 pumps.
10.2 Maintenance
After 8,000 hours of operation
it is strongly
recommended to inspect the pump and
change any worn parts, e.g. pistons.
This is
done in order to prevent a potential breakdown
of the pump.
If the parts are not replaced, more frequent
inspection is recommended according to our
guidelines.
Standstill:
The APP S 674 pumps are made of Super Duplex
materials with excellent corrosion properties.
It is, however, always recommended to flush
the pump with freshwater when the system is
shut down.
10. Service
