19
19
Danfoss District Energy
VI.GP.V2.02
DKDHR
11.0 Electrical connections
The station is wired and tested in the factory.
Electrical connections between the controller, pump(s), sensor
and actuator(s) are made.
The electrical connection of the substation must be performed
by a qualified and authorised electrician in compliance with all
applicable rules and regulations.
The station should be connected to a 230 V AC power supply.
The power supply connection must be carried out in accordance
with the applicable regulations and instructions.
The station must be wired and connected to an external main
switch so that it can be turned off during maintenance, cleaning
or repair work or in case of an emergency situation.
Component
Supply voltage
Power
consumption
Controller
ECL 110
230 V a.c., 50 Hz
3 VA
Controller
ECL 310
230 V a.c., 50 Hz
5 VA
Actuator
AMV 150
230 V a.c., 60 Hz
8 VA
Actuator
AMV10/20/30
230 V a.c., 60 Hz
2 VA
Pump, Wilo Yonos
Para
230 V a.c., 50 Hz
Max. 45 Watt
Pump, Wilo
Star Z Nova
230 V a.c., 50 Hz
Max. 4.5 Watt
Pump, Wilo Stratos
Eco Z
230 V a.c., 50 Hz
Max. 59 Watt