AKD 2800
Programming
Description of choice:
Key in a % value.
137 DC hold voltage
(DC HOLD VOLTAGE)
Value:
0 - 100% of max. DC hold voltage
✭
0%
Function:
This parameter is used to keep the motor
(holding torque) at start/stop.
Description of choice:
This parameter can only be used if a selection has
been made of
DC hold
in parameter 121
Start
function
or 122
Function at stop
. To be set as
a percentage value of the max. DC hold voltage,
which depends on the choice of motor.
✭
= factory setting. () = display text [] = value for use in communication via serial communication port
MG.28.H2.02 -
23