7. Torque screws (L70) to value shown in the diagram.
SAE/DIN Flange version bearing bore and housing
L35
L50
L1
060 & 080: 32 N•m [24 lbf•ft]
110: 63 N•m [46 lbf•ft]
160: 110 N•m [81 lbf•ft]
250: 174 N•m [128 lbf•ft]
L40
Lubricate seal lip with grease
19°
B10
B10
Housing supported in press.
(side view)
L70
P104 099
060 and 080: 6mm
110: 8mm
160: 10mm
250: 12mm
Cartridge flange
1. Install the inner retaining ring (L80) for the shaft seal carrier in the bearing housing.
2. Press shaft assembly into bearing housing (L35).
3. Install spacer ring (L95). C
C
Caution
Do not damage the piston sockets or shaft seal surface.
4. Install the end of the spacer with the larger inside diameter next to the inner shaft bearing cup.
5. Install retaining ring (L81).
Repair Instructions
Series 51 and 51-1 Bent Axis Motors Repair Instructions
Assembly
11009449 • Rev BA • December 2014
23