Install endcap
B046
J030
J020
P109040
Shaft seal
1. Cover shaft splines with an installation sleeve.
2. Install a new shaft seal (K020) with the cup side facing the pump.
3. Press the seal into the housing until it is deep enough to allow the retaining ring to be installed. Press
evenly to avoid binding and damaging the seal.
4. Install snap ring (K010).
P109058
K010
K020
Repair Instructions
Series 45 Frame K2 Axial Piston Pumps
Reassembly
30 |
©
Danfoss | April 2017
AX00000305en-US0101