Danelec DM800, Installation Manual

Page: 48 / 67

Installation manual for DM800 ECDIS G2
Copyright Danelec Marine A/S
DBS11427-21 Page 48/67
8 Service Menu
The ECDIS hardware can be reconfigured if needed. Service menu is entered from the ECDIS
software. To open the panel, do the following:
1. Open the Main Menu by clicking the menu icon in the bottom left corner:
2. In the Main Menu select “Settings”
3. In the “Settings”- menu select the “System”-sub-menu
4.
In the “System”- sub-menu select “Service menu”
5. Enter the Service Password (see section 6.3 “Service Technician Access” for default
password)
6.
The “Service Menu” will now open