Installation manual for DM800 ECDIS G2
Copyright Danelec Marine A/S
DBS11427-21
Page 33/67
6
Configuration of the ECDIS software
The following steps must be followed for each ECDIS:
1.
Sensor configuration
a.
Configuring sensors in the ECDIS Software
b.
Specifying precise positions of sensors onboard
The following step must also be performed, but may be synchronized between nodes. (Refer to
DBS11425 “User manual for Danelec Marine ECDIS software”
for description of how to
synchronize between ECDIS’s)
2.
Specifying vessel performance characteristics
3.
Initial data installation
a.
Installing chart permits
b.
Installing chart data
6.1 Main Screen
Below is the image of the main screen of the ECDIS.
Summary of Contents for DM800
Page 62: ...Installation manual for DM800 ECDIS G2 Copyright Danelec Marine A S DBS11427 21 Page 62 67...
Page 64: ...Installation manual for DM800 ECDIS G2 Copyright Danelec Marine A S DBS11427 21 Page 64 67...
Page 65: ...Installation manual for DM800 ECDIS G2 Copyright Danelec Marine A S DBS11427 21 Page 65 67...
Page 66: ...Installation manual for DM800 ECDIS G2 Copyright Danelec Marine A S DBS11427 21 Page 66 67...
