Danelec DM700 ECDIS, Installation Manual

Page: 30 / 67

Installation manual for DM700 ECDIS
Copyright Danelec Marine A/S
MAN11805-10 Page 30/67
6 Configuration of the ECDIS software
The following steps must be followed for each ECDIS:
1. Sensor configuration
a. Configuring sensors in the ECDIS Software
b. Specifying precise positions of sensors onboard
The following step must also be performed, but may be synchronized between nodes. (Refer to
DBS11425 “User manual for Danelec Marine ECDIS software”
for description of how to
synchronize between ECDIS’s)
2. Specifying vessel performance characteristics
3. Initial data installation
a. Installing chart permits
b. Installing chart data
6.1 Main Screen
Below is the image of the main screen of the ECDIS.