https://codelocks.zohodesk.eu/portal/en/kb/articles/kl1100-keypad
Opens the Lock (deletes current User Code Client in Public Function)
All programming including Technician and User Code Client
registration The default Master Code Client is 11335577
Sub-Master Code Client (8 digits)
Opens the Lock (deletes current User Code Client in Public Function) Limited programming including Technician and User Code
Client registration
Technician Code Client (6 digits)
Opens the Lock (retains current User Code Client in Public Function)
User Code Clients (4 digits)
Open the Lock Lock the Lock (in Public Function) Change the User Code Client (in Public Function) The default Master Code Client
is 2244
Important!
Once a Master Code Client is registered, it should be kept in a safe location. The Master Code is required for all programming
operations.
Functions
Before programming, select the most appropriate function for the application: A) or B) - See special Master Code set up commands.
A) Private Function
Important Note: This is the default function and is already pre-programmed in new locks.
This is the most common function and is used where the same code will be repeatedly used.
B) Public Function
The user enters their own personal four-digit code to lock the lock. Entering the same code will open the lock and clear the code, ready
for the next user. This function is used for short term, multi occupancy applications, e.g. a locker in a leisure centre.
Operating Instructions
All programs must begin by pressing the # button followed by the Master, Sub-Master or User Codes as required.
