9
9
D20 Touring rack assembly US Manual 1.0
4. Z5338 I/O Panel
Ethernet network
ETH 1
Represents the upper etherCON connector of the first
amplifier and may be used as input while the other two
amplifiers are linked within the rack.
ETH 2
Represents the bottom etherCON connector of the last
amplifier and may be used as output.
Note
In a daisy chain topology, if one device or an entire rack fails or is
switched off, this also affects all subsequent devices and/or system
racks which are then no longer connected to the network either.
A detailed description of remote control via Ethernet is given in the
technical information TI 310 (d&b code D5310.EN) which can be
downloaded from the d&b website at
www.dbaudio.com
4.1. INPUT
The INPUT section represents the input connectors of the first
amplifier while the other two amplifiers are linked within the rack. The
INPUT section allows both analog and digital audio signals to be fed
to the amplifier.
4.2. INPUT LINK
The INPUT LINK section represents the link output connectors of the
last (third) amplifier and allows the linking of further system racks
using the enclosed rack link cable (Z5333 Rack link).
4.3. REMOTE
The REMOTE section allows the daisy-chaining of system racks within
a remote network using the enclosed rack link cable (Z5333 Rack
link).