XSL Rigging components
3.13 XSL Touring carts
Intended use
The d&b XSL Touring carts are an integrated part of the XSL rigging
system. They are intended as transport solution as well as for setup,
requiring less space on-site.
In addition, the Load beam can also be stored in the cart, while the
Flying frame may be mounted and remain on top of the entire
cabinet assembly during transport and storage in the cart.
Once the cabinet assemblies are suspended, the touring carts can
be stacked and stored away.
The XSL-SUB Touring carts are also intended as ground support for
XSL-SUB ground stacks. Please refer to .
The XSL Touring carts are equipped and supplied with the
following rigging components.
Please verify the shipment for completeness and proper condition
of the items.
3.13.1 E7810 XSL8/XSL12 Touring cart
Pos. Component
Description
[1] E7810
Touring cart 4 x XSL8/XSL12
Total weight: 258 kg (569 lb),
incl. Flying frame and Load beam.
Dimensions:
H x W x D (cm) 157 x 80 x 80
H x W x D (inch) 62 x 31.5 x 31.5
[2] Locking pins
front
2 x Locking pins (Type B, 9 x 40 mm) at the
front.
[3] Splay link slot
Splay link slot incl. 2 x Locking pins (Type D,
10 x 40 mm).
[4] Pole
Four extendable poles.
[5]
Top lid.
[6]
Four heavy duty wheels 125 x 40 mm, two of
them as brake wheels.
Touring cart instruction label providing vital
safety and rigging instructions.
d&b XSL Rigging manual 1.1 en
- preliminary -
22
