Place the 16 corner bases (1) as shown on drawing so
they form a frame measuring 6x9 m.
If the marquee is mounted outside use ground pegs
(8) inserted into the ground with a hammer.
If the marquee is mounted on a concrete or wooden
floor, the corner base can be fastened with concrete
nails or screws.
Fasten only one corner until the entire frame has
been assembled in order to ensure that the other
corner bases are placed correctly within the square.
4
2
2
1
4
2
3
5
1
8
Place the longest tubes (2) in the 2 outermost holes
in each corner base and the shorter tube (4) in the
middle hole. Mount the tubes so the snap-and-click
features points upwards.
Mount the tubes (2) in (3) for a complete arch.
Mount the connector (5) with the middle tube (4).
Mount the horizontal tubes (3) with the connectors
(5) to make a ring.
Assemble and mount the top section consisting of (9)
and (7).
Now you can fasten the remaining corner bases if
necessary.
Finally, mount to cover onto the frame. Fasten the 4
straps at the ends of the cover to the 4 corner bases.
