6
Troubleshooting
Tel: 1-800-26-DANBY (1-800-263-2629)
PROBLEM
POSSIBLE CAUSE
SOLUTION
Does not
work
•
No power to unit
•
Power cord is unplugged
•
Wrong voltage is being used
•
Check connection of power cord to power source
•
Plug in the unit
•
Use proper voltage
Refrigerator
runs contin-
uously
•
Temperature set too low (too cold)
•
Door is not closed
•
Hot food inserted
•
Door opened too long or too often
•
Close proximity to heat source or direct
sunlight
•
Set temperature higher (warmer)
•
Close door securely
•
Be sure food is at room temperature before inserting
•
Minimize door openings/duration
•
Do not place unit close to heat sources or direct
sunlight
Internal tem-
perature not
cold enough
•
No power to unit
•
Power cord is unplugged
•
Temperature control set too high (too
warm)
•
Door is not closed
•
Hot food inserted
•
Door opened too long or too often
• Air
fl
ow obstruction
•
Wrong voltage is being used
•
Close proximity to heat source or direct
sunlight
•
Check connection of power cord to power source
•
Plug in unit
•
Check setting and change as needed
•
Close door securely
•
Be sure that food is at room temperature
•
Minimize door openings/duration
•
Allow room for air to circulate around the unit
•
Use proper voltage
•
Do not place unit close to heat sources or direct
sunlight
Temperature
too cold
•
Temperature control is set too cold
•
Adjust the temperature
Noises
•
Parts are expanding / refrigerant is circu-
lating
•
This is normal
•
E1: Refrigerator sensor failure.
•
E2: Refrigerator defrosting sensor failure.
•
E3: Refrigerator sensor failure and refrigerator defrosting sensor failure.
ERROR CODES