OPERATING INSTRUCTIONS
13
REMOTE CONTROL
1. Display Panel:
Displays the set temperature and
the timer settings. To change the temperature
scale being displayed, press the °C/°F button.
2. Up and Down Arrows:
Used to adjust the set
temperature in 1° increments and the timer
function in 30 minute increments up to 10 hours
and then in 1 hour increments up to 24 hours.
3. Mode Button:
Used to choose the operating
mode.
4. Follow Me Button:
Used to set the follow me
function.
5. °C/°F button:
Use to change the temperature
scale.
6. LED Button:
Press to turn the LED back light on
or off.
7. Power Button:
Used to turn the appliance on or
off.
8. Sleep Button:
Used to set the sleep function.
9. Fan Button:
Used to set the fan speed. The fan
can be set to low, medium, high and auto.
10. Timer On Button:
Used to set the auto on timer.
11. Timer Off Button:
Used to set the auto off timer.
12. Energy Saver Button:
Used to set the energy
saver function.
13. Lock Button:
Press the °C/°F button and the
timer button at the same time to lock the remote
control and prevent the settings from being
inadvertently changed.
TEMP
1
2
3
4
5
6
7
8
9
10
11
12
13
REMOTE CONTROL BATTERIES
The remote control requires two AAA alkaline
batteries (included). Batteries should be replaced
when:
a) No sound is heard when attempting to program
the appliance.
b) The appliance does not respond to a command
issued by the remote control.
Battery replacement:
1. Slide the rear cover on the remote in the
direction of the arrow.
2. Insert two AAA batteries following the same
orientation depicted inside the battery chamber
(+/-).
3. Reinstall the rear cover.
4. If the remote control will not be used for
extended periods of time, the batteries should be
removed.
Notes:
• Protect the remote control from high
temperatures, and keep it away from radiation
exposure.
• Keep the control panel receiver out of direct
sunlight.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (ni-cad, ni-mh,etc) batteries.
• The remote operates within a range of 8 meters
(26 ft.) from the receiver located inside the main
appliance. Any obstruction between the receiver
and remote may cause signal interference,
limiting the ability to program the main unit.
