|
Danatronics Corporation | 150A Andover St Suite 8C | Danvers, Massachusetts 01923-1011
Phone: 978-777-0081 | Fax: 978-777-3798
www.danatronics.com
|
Guide to DataXL Mobile
System Requirements
Hardware
Requirements
o
DataXL Mobile is for use with Danatronics ECHO series thickness gages
enabled with bluetooth hardware. If you would like to use our app, but
don’t have bluetooth yet, call us 978-777-0081 or send us an email
and we can help you get your gage upgraded
Software
Requirements
o
ECHO software Version 3.00 or higher
o
For iOS/iPadOS - v11 or higher
Device Connection
Before you can use any of the features available in DataXL Mobile, you need to connect
your ECHO series thickness gage. When the gage is connected a green dot will appear
on the upper left corner of the
Device Connection
section of the DataXL Mobile main
menu.
To connect your bluetooth enabled ECHO series thickness gage
Open DataXL Mobile on your IOS or Android device and turn on your gage
Select
Device Connection
in the upper left corner of the DataXL Mobile main
menu
A list will display that will include an ECHO-xxxx option if your thickness gage is
turned on. Select the ECHO device from the list. It will turn green and a green
button will appear at the bottom of the screen that says “DISCONNECT.” Your
gage is now connected and ready to use the other DataXL Mobile features
If your gage does not appear in the list, make sure your ECHO with bluetooth is
on and press the scan button in the upper right corner to refresh the list.
Note: Only one device can be connected to your thickness gage at a time
To disconnect your bluetooth Enabled ECHO series thickness gage
Press the green “DISCONNECT” button at the bottom of the Device connection
Screen or turn of your ECHO series thickness gage
