Danaher Motion SuperDrive ACS24 Series, User Manual

Page: 96 / 99

AC SuperDrive specifications
26.04.2005
8.11.2 D
IMENSIONS
Figure 37 AC SuperDrive with fins. Figure 38 shows dimensions for AC SuperDrive model 10 to
25 and drilling pattern for the flat heatsink versions and surface roughness and surface flatness
requirements for the flat heatsink versions. (Dimensions in mm).
AC SuperDrive Model
Flat version Y1 Y2 Y3 Y4
ACSxx 10 165 120 - 9
ACSxx 15 233.6 150 - 41.8
ACSxx 20 302.2 215 107.5 43.6
ACSxx 25 370.8 250 125 60.4
Finned version Y1 X1 X2 X3
ACSxx 10 165 25.5 - 114
ACSxx 15 233.6 25.5 - 182.6
ACSxx 20 302.2 25.5 125.6 251.2
ACSxx 25 370.8 25.5 159.9 319.8
8.11.3 S
URFACE REQUIREMENTS
Model Tolerance Rougness
ACSxx 10
0.1/270x165 mm
Ra 1.6
ACSxx 15
0.1/270x233 mm
Ra 1.6
ACSxx 20
0.1/270x302 mm
Ra 1.6
ACSxx 25
0.1/270x370 mm
Ra 1.6
Table 29 Rougness and flatness requirements for flat AC SuperDrive.
Item No.
89Y05120A
User's Guide 1.0
96