Danaher Motion Standalone MMC, Hardware Manual

Page: 53 / 182

Standalone MMC Hardware Manual 53
Danaher Motion
version 15.1
Standalone MMC Control
Figure 4-3: User Port Breakout Box Dimensions
4.5.4 General I/O Port
The 44-pin HD male D-sub General I/O Port connectors (labeled “GEN I/O” on the
front of the Control) provides connection between user I/O devices and the Control.
This port provides 16 source-only outputs (described in detail in
section 4.5.4.1 on
page 57 ), and 16 sink or source inputs (described in detail in section 4.5.4.2 on page
60 ).
•
Pin descriptions are provided in Table 4-19
•
Pin assignments are provided in Table 4-20
•
The available Flying Lead cable is described in Table 4-21.
•
Available Breakout Boxes and Cables are described in Table 4-22 .
•
Breakout Box dimensions are shown in Figure 4-4
1.750”
2.250”
3.000”
1
9
2.250”
8
15