Revision History
Date Issue
Description
11/4/03 0.4
Engineering
Review
11/12/03
0.6
Updated from Eng Review
11/20/03
0.7
Updates from Eng Review
2/3/04
0.8
Update for Position Loop
3/4/04 0.9
Update
to
add Conformance Section
4/7/04
0.95
Update Format and Config Section
05/2004 -
Initial
Release
03/2006
A
Addition of SynqNet information
10/2007
B
Add S21260 12/30 Arms base unit
02/2008
C
Add S22460 24/48 Arms base unit
05/2008
C1
Transfer A4 size, cover page design, EU version
© 2006, 2007, 2008 Danaher Motion - All rights reserved.
Technical changes to improve the performance of the equipment may be made without prior notice!
Printed in the Federal Republic of Germany
All rights reserved. No part of this work may be reproduced in any form (by printing, photocopying,
microfilm or any other method) or stored, processed, copied or distributed by electronic means
without the written permission of Danaher Motion.
Safety Symbols
WARNING
Warnings - alert users to potential physical danger or harm.
Failure to follow warning notices could result in personal
injury or death.
CAUTION
Cautions
- direct attention to general precautions. Personal
injury and/or equipment damage could result if precautions
are ignored.
NOTE
Notes - highlight information critical to your understanding
or use of the product.