Danaher Motion
05/2008
Product Overview
S200-CNS Product Manual
9
3.2 I
NCREASED
M
ACHINE
T
HROUGHPUT
&
L
ONGER
L
IFE
•
Servo system performance is synonymous with machine throughput. The S200 POSITION NODE
family takes servo performance to new heights.
•
Industry-leading current loop bandwidth up to 5 kHz and velocity loop bandwidth up to 400 Hz
means machine throughput can be increased by as much as 2 to 3 times.
•
Robust design including full fault protection, locking connectors and optical isolation promise
greater machine “up-time”.
•
Smooth motion, a benefit of sinusoidal current control and high resolution (24 bit) feedback
minimizes harsh torque disturbances that can cut short the life of mechanical components.
•
Both the AC and the DC input drives are equipped with separate control power input to speed
recovery from “E-Stop” conditions.
•
CANopen Field Bus or DeviceNet communications
3.3 R
EDUCED
E
NGINEERING
&
S
UPPORT
T
IME
•
Simplified tuning, friendly Graphical User Interface and shared components with Stepper products.
•
Windows-based Graphical User Interface models the tree format found in Explorer so learning is
quick and easy.
•
Digital Oscilloscope emulator for easier setup.
•
Easy to debug with full fault diagnostics reduce engineering support time.
•
Field bus connectivity.
3.4 CE-
/
UL-
C
ONFORMITY
•
The S200 position node with CANopen meets all relevant standards:
•
EMC Directive 89/336/EWG, standard used ENG61800-3
•
Low Voltage Directive 73/23/EWG, standard used 50178
•
UL / cUL 508C recognized