Using P7000Tools
04/06
Danaher Motion
4.3
T
OOLBARS
Utilities Toolbar
New Project
Creates a new project file in P7000
Tools
Open Project
Opens an existing project file in P7000
Tools
Save Project
Saves the current project to a file
Print
Configuration
Prints the selected drive configuration
(active only when the Configuration view is
selected)
Send All
Sends the entire configuration to the
currently connected drive
Retrieve All
Retrieves the entire configuration from the
currently connected drive
Reset Drive
Performs a soft drive reset equivalent to a
power cycle (used for clearing fault
conditions)
Soft Disable
Amplifier
Disables amplifier
Scan for
Connected
Scans the selected serial port for connected
drives
Motion Toolbar
Jog Motor Negative
Jogs the motor in the negative direction
at the selected velocity
Jog Velocity Toggle
Selects the active jog velocity for the Jog
arrow buttons (L designates Low Speed,
H designates High speed)
Jog Motor Positive
Jogs the motor in the positive direction at
the selected velocity
Stop Motion
Stops all Motion Node generated motion
and breaks any active move sequence
22 Rev
D
M-SD-7AC-01