DECLARATION OF CONFORMITY
We:
Danaher Motion
declare under our sole responsibility that the products of the family
K4000
are exclusively designed for incorporation in an other machine. The operation of the product is
submitted to the conformity of the complete equipment, following the provisions of the directive
89/392/EEC
The conformity of the above specified products with the provisions of the Directive
73/23/EEC
is
supported by the respect of the standards
CEI/IEC 1010-1
If the mounting and connecting instructions of the installation’s manual have been respected, this
product will be conform to the standards
EN50081-1
and
EN50082-1
relating to the EMC directive
89/336/EEC
.
Mounting instructions related to the EMC - directive 89/336/EEC
1. The frequency converter must be mounted in a closed metal cabinet.
2. The power connection between converter and motor must be MADE using shield cable.
3. The control connection must utilize shielded cables.
4. The shield of the cables must be grounded at both ends.
5. Power connections and control connection must be placed in separated canals.
6. A line filter must be installed. The machine manufacturer has the option to use a single filter for
all of his equipment. In this case the correct definition and sizing of the filter is his
responsibility. If the option of a separate filter is selected, this filter will have to match the
following specification:
Units Filter
type
I
Nom
(A)
K4005
FMAC-0931-0810 8
K4010
FMAC-0932-1610 16
K4015
FMAC-0932-1610 16
K4020
FMAC-0932-2510 25
K4030
FMAC-0934-3610 36
K4040
FMAC-0934-5010 50
K4060
FMAC-0953-6410 64
K4090
FMAC-0954-H110 110
K4120
FMAC-0955-H210 180
Supplier: Timonta, Mendrisio (Switzerland)
S476-gb-0348
User Manual K4000
Page 47 / 48