102
•
Technical Specifications
Xtium2-CXP PX8 User's Manual
Status LEDs Functional Descriptions
LED indicators mounted on the board bracket, provide information on board and connection status
as per the tables below.
S: Boot-up/PCIe Status LED — Provides general board status information
L1, L2, L3, L4: CoaXPress status LED — Indicates status for C1, C2, C3 and C4 respectively.
S: Boot-up/PCIe Status LED
Table 25: S Boot-up/PCIe Status LED
Color
State
Description
Red
Solid
FPGA firmware not loaded
Green
Solid
Normal FPGA firmware loaded, Gen3 speed, link width x8
Green
Flashing
Normal FPGA firmware loaded, Gen1/Gen2 speed, link width x8
Solid
Normal FPGA firmware loaded, Gen3 speed, link width not x8
Flashing
Normal FPGA firmware loaded, Gen1/Gen2 speed, link width not x8
Blue
Solid
Safe FPGA firmware loaded, Gen3 speed
Blue
Flashing
Safe FPGA firmware loaded, Gen1/Gen2 speed
Red
Flashing
PCIe Training Issue – Board will not be detected by computer
L1, L2, L3, L4: CoaXPress Status LED
The Xtium2-CXP PX8 implements the mandatory LED Status indicators as defined by the
CoaXPress Specification v1.1.
This LED status table reflects activity on input connectors C1, C2, C3 and C4.
Table 26: Camera CXP Status LED
LED State
Description
Off
No power, driver not started or Backup FPGA running
Slow Pulse Red
Driver running, but nothing connected.
Only if PoCXP is disabled
Fast Flashing
Green
/
Orange
Connection detection in progress, PoCXP enabled.
Fast Flashing Orange
Connection detection in progress, PoCXP disabled.
Solid Red
PoCXP over-current
Solid Green
Connected, but no data being transferred
Fast Flashing Green
Connected, data being transferred
Fast Flashing Red
System error:
If PoCXP is enabled, 12V is not detected.
Make sure PC power is connected to J10.
