70
Spyder3 S3-14 and S3-24 Monochrome Camera User's Manual
03-032-20117-01
Teledyne DALSA
Returning Camera Settings with Get Commands
You can also return ind ivid ual camera settings by inserting a ―
get”
in front of the com m and that you
w ant to qu ery. If the com m and has a tap or p ixel nu m ber p aram eter, you m u st also insert the tap nu m ber
or p ixel nu m ber that you w ant to qu ery. To view a help screen listing the follow ing get com m and s, u se
the com m and
gh
.
ASCII Commands: Reference
The follow ing table lists all of the cam era’s available ASCII com m and s. Refer to Ap p end ix A for d etailed
inform ation on u sing these ASCII com m and s.
Table 15: Command Quick Reference
Mnemonic
Syntax
Parameters
Description
correction calibrate fp n
ccf
Perform s FPN calibration and elim inates FPN noise by
su btracting aw ay ind ivid u al pixel d ark cu rrent.
calcu late cam era gain
ccg
i t i
Calcu lates the cam era gain accord ing to the selected
algorithm .
i
= Calibration algorithm to u se.
1
= This algorithm ad ju sts analog gain so that 8% to
13% of tap ROI p ixels are above the sp ecified target
valu e.
2
= This algorithm ad ju sts analog gain so that the
average pixel value in tap’s ROI is equal to the
sp ecified target valu e.
3
= This algorithm ad ju sts d igital gain so that the
average pixel value in tap’s ROI is equal to the
sp ecified target.
4=
This algorithm ad ju sts the analog gain so that
the p eak tap ROI p ixels are ad ju sted to the sp ecified
target.
t =
Tap valu e. Use
0
for all tap s or
1
or
2
for
ind ivid u al tap selection d ep end ing on cam era m od el.
i
= Calibration target valu e in a range from
1024
to
4055
DN (12 bit LSB).
correction calibrate p rnu
ccp
Perform s PRN U calibration and elim inates the d ifference
in resp onsivity betw een the m ost an d least sensitive
p ixel creating a u niform resp onse to light.
calibrate inp u t LUT
cil
Calibrates the inp u t looku p table (LUT). The LUTs are
u sed to rem ove nonlinearity from the analog chain.
Cam era Link m od e
clm
i m
Sets the camera’s bit w id th w here:
For S3-1x-01K40 and S3-1x-02K40
0 =
8 bits, 1 tap
1 =
12 bits, 1 tap
For S3-2x-01K40 and S3-2x-02K40
2
=
8 bits, 2 tap s
3
=
12 bits, 2 tap s
Parameters:
t = tap id
i = integer value
f = float
m = member of a set
s = string
x
= pixel column number
y
= pixel row number
