Dalsa Piranha XL PX-HM-16K12B-00-R Manual Download Page 62

Page: 62 / 75

•

The Piranha XL XDR Camera

Display Name

Feature

Description

View

File Access

Buffer

FileAccessBuffer

Defines the intermediate access buffer that allows the exchange

of data between the device file storage and the application.

1.00

Guru

File Access

Offset

FileAccessOffset

Controls the mapping offset between the device file storage and

the file access buffer.

1.00

Guru

File Access

Length

FileAccessLength

Controls the mapping length between the device file storage and

the file access buffer.

1.00

Guru

File Operation

Status

FileOperationStatus

Displays the file operation execution status. (RO).

1.00

Guru

Success

The last file operation has completed successfully.

Failure

The last file operation has completed unsuccessfully for an

unknown reason.

File Unavailable

FileUnavailable

The last file operation has completed unsuccessfully because

the file is currently unavailable.

File Invalid

FileInvalid

The last file operation has completed unsuccessfully because

the selected file in not present in this camera model.

File Operation

Result

FileOperationResult

Displays the file operation result. For Read or Write operations,

the number of successfully read/written bytes is returned. (RO)

1.00

Guru

File Size

FileSize

Represents the size of the selected file in bytes.

1.00

Guru

Summary of Contents for Piranha XL PX-HM-16K12B-00-R












































































Search results

Summary of Contents for Piranha XL PX-HM-16K12B-00-R

Reviews:

Related manuals for Piranha XL PX-HM-16K12B-00-R

Brands by name

Popular brands

Dalsa Piranha XL PX-HM-16K12B-00-R, Manual

Search results

Summary of Contents for Piranha XL PX-HM-16K12B-00-R

Reviews:

Related manuals for Piranha XL PX-HM-16K12B-00-R

Brands by name

Popular brands